SCHNEIDER ELECTRIC-ATS480C21Y-

Schneider Electric-ATS480C21Y

The Schneider Electric ATS480C21Y Soft Starter is a compact, high-performance motor starting solution built for smooth, torque-controlled acceleration and deceleration. Designed to protect motors and mechanical systems, this surplus automation equipment ensures reliable operation, reduced energy loss, and long-term efficiency across a wide voltage range.

At ReVolt Automation, we offer new surplus Schneider Electric Soft Starters that are factory-sealed, tested, and backed by a 1-year limited warranty—ideal for OEMs, integrators, and industrial maintenance operations.

⚙️ Electrical Specifications

• Rated Supply Voltage (Us): 208–690 V AC
• Supply Frequency: 50 / 60 Hz
• Control Circuit Voltage (Uc): 110–230 V AC
• Rated Output Current (Icl): 210 A
• Motor Power (AC-3): 55 kW @ 230 V • 110 kW @ 400 V • 150 kW @ 690 V
• Utilization Category: AC-53A
• Overload Capacity: 4 × In for 10 seconds
• Start / Stop Method: Torque control with adjustable current limit
• Bypass Contactor: Integrated (internal)
• Efficiency: Internal bypass reduces steady-state power loss

🔌 Control, I/O & Communication

• Logic Inputs: 3 × LI (LI1, LI2, LI3) – 5 mA, 4.3 kΩ impedance
• Relay Outputs: 2 × R (R1, R2) configurable for Run, Trip, Fault, Ready
• Relay Ratings: 5 A @ 250 V AC / 2 A (inductive)
• Minimum Switching Current: 100 mA @ 12 V DC
• PTC Input: 750 Ω (motor thermal protection)
• Communication Interface: RS-485 (Modbus RTU)
• Transmission Rates: 4,800 / 9,600 / 19,200 bps
• Control Options: Local or remote operation via I/O or Modbus

🌡️ Environmental & Protection Ratings

• Protection Degree: IP00 (open frame design)
• Cooling Method: Forced convection
• Operating Temperature: –15 °C to +40 °C (full rating)
• Derating Above 40 °C: 2 % per °C
• Storage Temperature: –25 °C to +70 °C
• Altitude Rating: ≤ 1,000 m (no derating); > 1,000 m apply 2 % per 100 m
• Pollution Degree: 2 (industrial environments)
• Noise Level: ≈ 56 dB
• Compliance: IEC 60947-4-2 and UL standards

🧱 Mechanical Specifications

• Frame Size: C (standard industrial frame)
• Dimensions (H × W × D): 340 × 200 × 272 mm (approx.)
• Weight: ≈ 13 kg
• Mounting Orientation: Vertical ± 10°
• Ventilation: Bottom-to-top airflow; allow adequate clearance between units

⭐ Key Features & Highlights

• Smooth, torque-controlled acceleration and deceleration for reduced stress
• Integrated bypass contactor for improved efficiency and heat reduction
• Wide 208–690 V voltage range for global use
• Advanced motor protection against overload, stall, and phase loss
• RS-485 (Modbus RTU) communication for diagnostics and integration
• Compact, panel-friendly design ideal for industrial retrofits
• Designed for reliability and compliance with IEC and UL standards

🏭 ReVolt Automation – Trusted Industrial Supplier

ReVolt Automation delivers top-quality surplus automation equipment, including the Schneider Electric ATS480C21Y Soft Starter and other industrial motor control products from brands like Siemens, ABB, and Allen-Bradley. Every unit is new surplus, factory-sealed, and ships quickly for dependable global supply.

Condition: New surplus, factory sealed

Warranty: 1-year limited warranty